how to flash with odin without losing info

tar.md5 FIRMWARE file that you downloaded.

Click on the AP tab on Odin window and select the.

zip firmware file you have downloaded to get the Odin flashable. The Odin window on PC should detect the phone and show an “Added!!” message.

Once your device is in download mode, connect it to the PC with a USB cable.

Press Volume Up on the warning screen to accept it and boot into Download mode.

Press and hold “Home + Power + Volume down” buttons for a few seconds until you see a warning screen.

Boot your Samsung device into Download mode:.

Under Developer options, look for “Enable OEM unlock” checkbox/toggle and make sure you Check it or turn it ON.

Go back to the main Settings screen, scroll to bottom and select “Developer options” from there.

Go to Settings » About phone » and tap “Build number” seven times to enable “Developer options”.

zip file and run/open Odin3 v3.10.7.exe file from the extracted files on your PC.

Update : Check out our new guide on this ‘ How to Install stock firmware on Samsung Galaxy device‘ here.įlashing a firmware using Odin is pretty easy, but you’ve to be very cautious with the options you chose on the Odin screen and the files you flash. Any carelessness might lead to a bricked device. If you’re flashing a firmware using Odin for the first time, we’d recommend you to not rush and follow each and every step very carefully.

How to flash with odin without losing info